Test Instruments India | Under 1 Roof 1679 Testing Instruments To Chose!

Rain Gauge with Bracket

rain_gauge_with_bracket_NI

Rain Gauge with Bracket
Features:
Use metal spike to mount in ground
Simple and easy to use
Mounts on wall or fence with bracket
Specification:
General:
Operating Temperature: -40° to +150° F (-40° to +65° C)
Storage Temperature: -50° to +158° F (-45° to +70° C)
Transducer: Silicon photo diode
Spectral Response (10% points): 400 to 1100 nanometers
Cosine Response
Percent of Reading: ±3% (0° to ±70° (incident angle), ±10% (±70° to ±85° incident angle)

Percent of Full Scale: ±2% (0° to ±90°)
Supplied Cable Length: 3′ (0.9 m)
Cable Type: 4-conductor, 26 AWG
I/O Specifications:
Green wire: Output (0 to +3 VDC); 1.67 mV per W/m2
Correction per degree above reference temp: -0.067% of reading per °F (-0.12% per °C)
Correction per degree below reference temp: 067% of reading per °F (+0.12% per °C)
Housing Material: UV-resistant PVC plastic
Dimensions (Length x Width x Height): 2.00″ x 2.75″ x 2.25″ (51 mm x 70 mm x 57 mm)

Weight: 0.5 lbs. (226 g)
Red & Black wires: Ground
Yellow wire: +3 VDC ±10%; 1 mA (typical)
Temperature Coefficient: +0.067% per °F (+ 0.12% per °C)
Reference temperature: 77° F (25° C)
Sensor Output:
Resolution and Units: 1 W/m2
Drift: up to ±2% per year
Update Interval: 50 seconds to 1 minute (5 minutes when dark)
Range: 0 to 1800 W/m2
Accuracy: ±5% of full scale (Reference: Ripley PSP at 1000 W/m2)

OUR SALES AND SERVICE CENTRE LOCATION MAP